Hotchkis 80101-1 300C-Magnum Stage 1 TV S System User Manual
Installation of hotchkis front sway bar
Anti-roll bar set
22101 – Chrysler Magnum, Charger, 300C, SRT-8
22107 – Dodge Challenger
Thank you for your purchase from our new line of Chrysler parts.
Please call us at (877) 4NO-ROLL if you have any questions
regarding the service or installation of your Hotchkis Performance products.
Warning: This installation should be performed by a trained professional. The installation requires
lowering of the rear cradle from the vehicle for swaybar removal and reinstallation.
Tools Required for this Installation
- Hydraulic jack, jack stands, torque wrench (4 post lift or alignment rack preferable)
- The following sockets or wrenches: 10mm, 13mm, 15mm, 16mm, 18mm, 21mm
INSTALLATION OF HOTCHKIS FRONT SWAY BAR
1)
Secure the rear wheels with blocks and jack the front up. Support the front of the vehicle with jack
stands on the frame. Observe the stock sway bar orientation and position for reference.
Note: If you are using a 4 post lift or alignment rack, you do not have to jack the front up.
2)
Remove the heat shields that cover the subframe mounts using a 10mm wrench or socket.
Document Outline
- Anti-roll bar set
- 22101 – Chrysler Magnum, Charger, 300C, SRT-8
- Anti-roll bar set
- 22101 – Chrysler Magnum, Charger, 300C, SRT-8
- Improperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- Improperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- Installed in any vehicle that has been modified;
- Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- Installed on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- Did you register the product at 0TUwww.hotchkis.netU0T or via the mail-in warranty card within 30 days of purchase?
- Is the product appropriate to your application?
- Did you carefully and thoroughly read the instructions provided along with the product?
- Do you have the original invoice or sales receipt?
- Is the return date within 36 months from the purchase date?
- Are you the original purchaser?
- Was the product properly installed by a qualified, licensed auto mechanic?
- Has the product been installed on the original vehicle on which it was installed at all times?
- Is the product unmodified and clean?
- Is the reason for return a legitimate product defect?