Hotchkis 19410 Lexus IS 300 Sport Coil Springs User Manual
Hotchkis For the car
19410 STREET COIL SET
01-UP LEXUS IS300
Thank you for your purchase from our line of Lexus parts.
Please call us at (877) 4NO-ROLL if you have any questions regarding the service or installation
of your Hotchkis products. Visit us online @
• This installation will require:
A coil spring compressor, jack stands, floor jack
The following wrenches or sockets: 10mm, 12mm, 14mm, 17mm
The following Allen wrenches or hex sockets: 5mm
Torque wrench.
INSTALLATION OF FRONT COIL SPRINGS
1)
Securely block the rear wheels of the vehicle. Do not jack up the vehicle yet!
2)
Use a 10mm socket or wrench to loosen and remove the two small nuts holding the electrical
box to the strut mounts on the driver’s side. Remove the two nuts on the passenger side as well
to remove the heat sync. THIS ITEM MAY BE HOT! Move both components off to the side and
retain the stock mounting hardware. This should expose the strut mount nuts on each side.
Document Outline
- INSTALLATION OF REAR COIL SPRINGS
- UImproperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- UImproperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- UInstalled in any vehicle that has been modified;
- UInstalled on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- UInstalled on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- UDid you register the product at U1TUwww.hotchkis.netU1TU or via the mail-in warranty card within 30 days of purchase?
- UIs the product appropriate to your application?
- UDid you carefully and thoroughly read the instructions provided along with the product?
- UDo you have the original invoice or sales receipt?
- UIs the return date within 36 months from the purchase date?
- UAre you the original purchaser?
- UWas the product properly installed by a qualified, licensed auto mechanic?
- UHas the product been installed on the original vehicle on which it was installed at all times?
- UIs the product unmodified and clean?
- UIs the reason for return a legitimate product defect?