Hotchkis 22435R MX5 Rear Sport Sway Bar - Manual (Page 4)

7F
Reinstall New Hotchkis Bar
Repeat steps 1F through 6F in reverse order. Your new Hotchkis bar uses new bushings and
brackets. Use the supplied silicon grease to lube the inside surface of the bushings. Make
sure to use thread lock compound on the subframe bushing bracket bolts and the end link
nuts. Special Note: Due to the shape our bushing brackets, the ABS line bracket will need to
be ground down to allow the Hotchkis bracket to sit flat. This is quite easy to do. You can use
a file to grind down section in question. This will be necessary for both sides. Reuse the oem
nuts for the Hotchkis installation. This sway bar is adjustable, so please refer to the following
pictures to help you figure out the setup you desire.