beautypg.com

Hotchkis 89001 TVS System, Extreme, 64-66, GM A-Body, Big Block User Manual

Page 5

background image

- Soak the entire can with some good penetrating oil. Let it sit for about 20-30 minutes.

- Grab your trusty air chisel and hammer away at the flange in the direction of extraction.

- If the flange begins to tear or bend then it may necessary to chisel the other end of the can to fold the

edge over. This way you have something to chisel onto in the direction of extraction.

9. Next, clean the differential mounts and make sure there are no burrs that will make reinstallation difficult.

Soak the holes with penetrating oil to aid re-insertion of new can.