beautypg.com

Hotchkis 89001 TVS System, Extreme, 64-66, GM A-Body, Big Block User Manual

Page 2

background image

2. There are various methods for installing your new upper trailing arms. Preferences in methods are mainly

based on the way you remove the old rubber Can Bushings from the differential. Some may find it easier

to detach the entire differential (rear end) from the car in order to remove the Can Bushings. This makes it

easier to get at the Can bushings for removal and replacement. The only problem with this method is that

it requires much more to be disconnected e.g. brake lines, parking brake, axle u-joint, and lower trailing

arms. However, it is possible to remove the Can Bushings without taking the rear end off the car, but it’s

tricky.

In this manual, we will describe how to replace the Can Bushings without removing the rear end from the

car.

3. First, raise the rear of the vehicle so that the rear wheels are off the ground. If you are using a 2-post lift,

support the differential with a hydrailic tranny jack.

4. Remove the rear shocks.