beautypg.com

Hotchkis 89001 TVS System, Extreme, 64-66, GM A-Body, Big Block User Manual

Page 39

background image

2282 1964-1972 GM A Body


Hotchkis Sport Suspension LLC.

5

3. Attach Sway Bar to the End Links

Orient the sway bar so that the Hotchkis sticker is right side up. At this time you can

choose the stiffness setting by using the hole at the end for a softer setting or the 2

nd

hole from the end for a harder setting. use the ½” x 3” bolt to attach the sway bar to

the end link. The bolt should be pointing inboard. Use the ½” SAE washer (small) on

the bolt head side and the ½” USS washer (larger) on the nut side. Do not fully tighten

at this time.

4. Install Axle Brackets

First step is to install the provided stainless steel U-bolts. Each U-bolt will install a little

inboard of the spring mount. You will have to unclip the brake line from the axle tab

and carefull pull the brake line away from the axle tube to give enough clearance for

the U-bolts.