High Lifter SPOOL LOCKER HONDA ATV - Manual (Page 7)

Differential Installation
1. Place the differential back into the ATV.
2. Put the propeller shaft back into the differential. Make sure that proper care has been taken not to get
dirt and other debris on the shaft ends. Apply grease to end before inserting back into differential. Once
it is greased place into differential and set dust boots Push the differential forward.
3. Tighten all differential mounting hardware according to factory specification.
4. Re-attach the vent tube to the differential. Install the propeller shaft cover and inner fender cover. (If
applicable)
Shaft Installation
1. Make sure that the differential is secure and in place.
2. Slide side axle into differential. Rotate shaft slightly to align splines.
7