High Lifter Lift Kit for Kawasaki Mule 4010 - Manual (Page 4)

9. Now remove the factory coil spring.
10. Install the new High Lifter coil spring onto the strut shaft, making sure the end of the bottom spring
wrap is against the spring stop.
11. Reassemble the strut in reverse order of the disassembly.
NOTE: The spring may need to be compressed a small amount during the reassembly process.
12. Holding the large hex nut and washer, tighten the retaining bolt until the lock washer is compressed and
tightened.
13. Once the strut is reassembled, tighten 2 of the stud extenders onto the top of the strut. Next, slide one of
the lift blocks onto the top of the strut.
4