High Lifter Max Clearance Front Forward Upper & Lower Control Arms for Polaris RZR 800 "S_"4"" User Manual
High Lifter Hardware

1
780 Professional Drive N. Shreveport, LA 71105 Phone (318)-524-2270 Fax (318)-524-2297
Max Clearance Polaris RZR 800 “S”
Front Forward Control Arm Kit
 
The Max Clearance A-arm kit is designed to permit mounting of oversize tires on the 
Polaris RZR 800 “S”. It should be recognized that the product is made for slow speed 
riding in deep mud with oversized tires and not for higher speeds, hill climbing, off 
camber riding, jumps, or other high speed or high stress use. The product is intended for 
competition in mud pits and slow mud riding and, as such, is sold without warranty. High 
Lifter expressly disclaims responsibility for accidents or injury or consequential damage 
to original equipment that may be said to arise out of use of large oversized tires, lift kits, 
or this product. 
 
High Lifter strongly recommends that helmets and all appropriate safety equipment be 
worn when riding ATVs and in particular when riding lifted and/or modified ATVs with 
oversized tires. If this explanation is not what you expected and is unsatisfactory to you, 
before installation, you may return the product for a full refund of the purchase price. 
 
If this product is not what you expected, or is not consistent with your intended use, you 
should return the product immediately to the seller, before installation, for a refund of the 
purchase price; less any fees. After installation, product is warranted for 90 days for 
defects in workmanship and materials. Warranty is limited to refund of the purchase 
price or replacement of the kit, at the seller’s option. 
 
Dealers, Installers and Owners of Vehicle 
You are responsible for informing your customer or purchaser of the information 
contained above and the increased potential hazards of operating an ATV and/or RUV 
equipped with these modifications. If you install the kit, it is your responsibility to also 
install the warning label prominently in view of the driver and in prominent view of the 
driver and passenger on RUVs and multi-passenger ATVs. They should also be 
instructed to notify anyone operating the vehicle, as well as any passengers, that 
modifications are installed. 
 
As stated above, it is critically important that everyone operating or riding as a passenger 
be instructed in the need for slower speed operation, regardless of terrain, after these 
modifications installed. 
 
