Focus Foodservice FPS-Plus Polymer Shelving with SaniGard Anti-Microbial Protection - Assembly Instructions - Manual (Page 2)

Call Customer Service at 1.800.968.3918 | Fax 1.800.968.4129
www.focusfoodservice.com
FOODSERVICE, LLC
ASSEMBLY INSTRUCTIONS
Model# FTPRCST5
5" TPR Stem Casters with Bumpers
Model# FSCAST5
5" Polyurethane Stem Casters with Bumpers
Model# FTCAST5
5" Polyurethane Threaded Casters with Bumpers
Step 1 Slide a plastic bumper up the bottom of post about 4˝ - 6˝, smooth side facing up.
Step 2 For Stem - Install caster by inserting it into the hole in the bottom of the post.
For Threaded - Remove leveling assembly by turning it counter-clockwise.
Install caster by screwing it into the hole at the bottom of the post.
Step 3 Slide the plastic bumper down to the bottom of the post.
Step 4 Repeat these steps to install the remaining 3 casters.
Step 5 Then assemble shelving unit.
Note: The casters can be locked in place by turning the steel lock mechanism counter clockwise on the side of two
of the casters.
Weight capacity - Stem - 300 lbs. per caster
Threaded - 200 lbs. per caster
5" Polyurethane
Stem Casters
with Bumpers
5" Polyurethane
Threaded Casters
with Bumpers
rev. 0111