EVS XEDIO Importer Version 3.1 - January 2011 User Manual - Manual (Page 12)

Xedio Suite Version 3.1 – User’s Manual – Xedio Importer
EVS Broadcast Equipment – January 2011
Issue 3.1.B
2.2 IMPORT PROCESS
To be able to import files from P2, and XDCAM cameras, you need to proceed as
follows:
1. In the Setup window you can accessed by clicking the Setup button, define:
• the source and destination locations,
• the default values for the properties of the imported files,
• the audio channel assignment.
2. Specify the Label field, that is to say the name of the media when it will be
imported into Xedio CleanEdit.
3. If requested, change the file properties before you perform a given import.
4. Ensure that the Published check box is ticked to make the media available
and visible to all users.
5. Select the files you want to import from the Media List:
• Press CTRL + click on the files for a selection of multiple non-contiguous
files.
• Press SHIFT + click on the first and last file for a selection of multiple
contiguous files.
6. Click the Start Import Process button at the bottom of window.
At the end of the import process, a message specifies how many files have been
successfully imported. Once imported, the files are available in CleanEdit, in the
Media Manager tab.
2.3 FIELDS IN THE XDCAM, P2 AND
XDCAMEX TABS
Field Description
General
Status Status of the last performed action (setup or import status)
Auto Src Disk List of disks detected when the source files are searched on
disks using the Auto Src Disk process (selected in the
Setup).
Manual/Auto Specifies whether the import process is manual or automatic.
When the import is automatic, all the identified files are
automatically imported.
5