EVS IPDirector Version 5.6 - May 2009 Part 4 User's Manual - Manual (Page 57)

Issue 5.6.D IPDirector Version 5.6 – User Manual – Part 4: Ingest
EVS Broadcast Equipment – May 2009
46
The ingest start time and stop time will be changed accordingly, following the
Magnetize rules (see section 2.9.5 ‘Magnetize Rules’ on page 33). All the other
information will remain unchanged.
2.15 STOPPING AN INGEST
Refer to section 2.6.3 ‘Rules When Using Start and Stop Buttons’ on page 24 for
more information on the channels impacted by the use of those buttons.
2.15.1 H
OW TO
S
TOP A
R
UNNING
I
NGEST
To stop a running ingest, proceed in one of the following ways:
1. Click the running ingest block you wish to stop.
2. Click the corresponding Stop button:
1. Right-click the running ingest block you wish to stop.
2. Select Stop Ingest from the contextual menu.
The recording is automatically stopped for the whole clip.
2.16 WORKING WITH GANGED CHANNELS
In the Ingest Scheduler, the recorder channels can be ganged and unganged.
A block created on a channel is automatically created with the same properties on
all the ganged channels. Clips created by such blocks are linked and stay linked
even if the channels are unganged afterwards.