EVS XEDIO Browse Version 4.35 - August 2013 User Manual - Manual (Page 36)

• When a virtual media has just been loaded, the top bar represents the whole media.
The dark gray zone represents the whole media and covers the whole length of the
middle bar:
• When a virtual media is loaded, double-clicking on the dark gray zone toggle the
section covered by the top bar from the whole media length to the virtual media length
(between mark IN and mark OUT), and vice-versa:
The dark gray zone is reduced to represent the virtual media length and position with
regard to the whole media.
• If you position the mouse on the middle bar and rotate the mouse wheel up or down,
you respectively increase or reduce the section of the media, or virtual media, visible
in the top bar. Thus, the dark gray zone is enlarged or reduced:
• If you click on the dark gray zone and drag it to the left or to the right, you shift the
section of media, or virtual media, visible in the top bar to the beginning or to the end of
the media.
Nowline, Mark IN and Mark OUT
Display
The (mark) IN point, the (mark) OUT point, and the nowline are shown in the media bar of
the Player paneas vertical lines.
• An IN point, or mark IN point is shown as a green line on the media bar.
• An OUT point, or mark OUT point is shown as a red line on the media bar.
• The nowline, representing the current position within the loaded element, is shown as
a blue line on the media bar. To place the nowline at a given position, simply click at
the requested position on the media bar.
28 3. Player
EVS Broadcast Equipment SA Issue 4.35.B - August 2013