EVS XEDIO Browse Version 4.35 - August 2013 User Manual - Manual (Page 26)

If the loaded media is a virtual media file the tab will display its properties ready for update:
2.4.2. Creating a Virtual Media
To create a virtual media, proceed as follows:
1. Load the required media from the Media tab to the Player pane.
2. Browse in the media until you select the Mark IN point and click the
button or press the key.
The Mark In Timecode field is filled and appears in green. The thumbnail IN is
displayed.
A default label is automatically assigned into the Label field. This can be accepted or
changed at this stage or later if necessary.
3. Browse in the media until you select the Mark OUT point and click the
button or press the key.
The Mark Out Timecode and the Duration fields are filled and the Mark Out
Timecode field appears in red. The thumbnail OUT is displayed:
18 2. Tabs Pane
EVS Broadcast Equipment SA Issue 4.35.B - August 2013