EVS XEDIO Cutter Version 4.2 - June 2012 User Manual - Manual (Page 32)

Issue 4.2.B Xedio Suite Version 4.2 – User Manual - Xedio Cutter
EVS Broadcast Equipment – June 2012
24
3.4.6 L
OGS
Logs are reference marks that can be placed wherever needed on the loaded
media. Their purpose is to mark points of interest on the media and to facilitate
rapid movement between them.
They are shown on the media bar as transparent triangles. There is always a black
stripe below the video display when logs are present on the loaded media/clip.
When the nowline is on a log timecode, a transparent triangle appears on the left
of this black stripe.
•
This button creates the mark on the media at the nowline position and is
visible as a triangle on media bar at the corresponding video frame.
• CTRL +
This removes a log when the nowline is placed on it.
•
The Goto Previous Mark and Goto Next Mark buttons allow movement
between the marked frames.