EVS IPDirector Version 5.8 - July 2010 Part 4 User's Manual - Manual (Page 71)

Issue 5.8.B IPDirector Version 5.8 – User Manual – Part 4: Ingest
EVS Broadcast Equipment – July 2010
60
Note
The recorder channel referred to in step 2 must reside on an EVS video
server so that the VTR Engine can obtain VITC/ANC-TC from the video.
This enables the auto-edit process to ensure frame accurate clip
creations.
3.5 VTR CONTROL PANEL MODE 3: BATCH
DIGITIZE MODE
3.5.1 P
URPOSE
In Batch Digitize Mode , several clips can be queued in a Batch list, so
that they can all be digitized in one process run.
3.5.2 S
CREEN ELEMENTS AND FUNCTIONS
The Transport Mode and Auto-edit Mode buttons and controls remain the same in
Batch Digitize Mode.
Refer to
• Section 3.3 on page 54 for Transport Mode
• Section 3.4 on page 57 for Auto-edit Mode
The extra fields and buttons for Batch List Mode are explained below.
B
ATCH
L
IST MANAGEMENT BUTTONS
At the top of the list are the Batch List management buttons:
Field Name Instructions
Batch list name Contains the name of the currently active batch list (if any).
Open Opens an existing batch list.
Close Closes the active batch list.
New Creates a new batch list.
Modify Modifies the properties of the active batch list.
Delete Deletes a saved batch list.