EVS IPDirector Version 5.8 - July 2010 Part 4 User's Manual - Manual (Page 69)

Issue 5.8.B IPDirector Version 5.8 – User Manual – Part 4: Ingest
EVS Broadcast Equipment – July 2010
58
Use the buttons and to go respectively to the Mark IN or Mark OUT
frames.
R
ECORDER BAR
The Recorder bar shows the linked recording channel on the EVS video server.
The device can be changed by right-clicking the blue bar and selecting a device
from the list that appears or by dragging a recorder channel from the Channel
Explorer. This selection is required to be able to initiate the Auto-Edit or Bach
Digitize modes.
Note
A default recorder can be defined in the VTR Engine configuration. If a
default recorder channel is associated, it is automatically assigned when
selecting a VTR channel.
C
LIP
I
NFORMATION FIELDS
Field Name Instructions
Clip Name Enter a name for the clip here.
Level Select a level for the clip.
Tape ID Enter a Tape ID, according to the label on the tape in the
VTR.
Type Select the appropriate type for the clip.