EVS XEDIO Cutter Version 4.35 - August 2013 User Manual - Manual (Page 35)

Audio meters located on the right side of the Video Display represent the audio channels
of the monitored track.
3.4.6. Logs
Logs are reference marks that can be placed wherever needed on the loaded media. Their
purpose is to mark points of interest on the media and to facilitate rapid movement
between them.
They are shown on the media bar as transparent triangles. There is always a black stripe
below the video display when logs are present on the loaded media/clip. When the nowline
is on a log timecode, a transparent triangle appears on the left of this black stripe.
•
This button creates the mark on the media at the nowline position and is visible as a
triangle on media bar at the corresponding video frame.
• CTRL +
This removes a log when the nowline is placed on it.
•
The Goto Previous Mark and Goto Next Mark buttons allow movement between the
marked frames.
USER MANUAL Xedio 4.35 Xedio Cutter
3. Player 27