EVS Xedio Approval Version 4.35 - August 2013 User Manual - Manual (Page 31)

Clip
When a clip is loaded, the IN point, the OUT point and the nowline are displayed on this
top bar.
Middle Bar
The middle bar is used to zoom into the loaded element.
Its dark gray zone shows the section of the media, out of the whole media, visible in the
top bar and the relative position of the visible section in the whole media.
• When a media or an edit has just been loaded, the top bar represents the whole media.
The dark gray zone covers the whole length of the middle bar:
• When a clip has just been loaded, the top bar represents the whole media. The dark
gray zone represents the whole media and covers the whole length of the middle bar:
• When a clip is loaded, double-clicking on the dark gray zone toggle the section
covered by the top bar from the whole media length to the clip length (between mark
IN and mark OUT), and vice-versa:
The dark gray zone is reduced to represent the clip length and position with regard to
the whole media.
• If you position the mouse on the middle bar and rotate the mouse wheel up or down,
you respectively increase or reduce the section of the media visible in the top bar.
Thus, the dark gray zone is enlarged or reduced:
USER MANUAL Xedio 4.35 Xedio Approval
3. Player 23