EVS IP2Archive Version 1.3 - July 2013 User Manual - Manual (Page 11)

1.3. Hardware Setup
1.3.1. Overview Hardware Components
By default, the IP2Archive system consists of the following hardware components:
• Oracle database server
• Application server
• Managment server
• Third party network switch (Cisco)
• Third party Hierarchical Storage Management system (HSM): DIVArchive (DIVA)
from Front Porch Digital, XenData from XenData, FlashNet from SGL and Atempo
Digital Archive from Atempo.
• Third party LTO tape library (Spectralogic) We support any hardware here because
this should be supported by the HSM system.
The following hardware components can be added for failover and performance:
• Oracle failover database server
• Additional application servers
1.3.2. Description and Technical Specifications
Oracle Database Server
The Oracle database server has redundant power supplies and redundant memory. The
system drives containing the operating system (Linux 5.4 x64) and Oracle software are
configured in RAID 1 (mirror). The data drives are configured in RAID 5.
Weight Power BTU
# power
sockets
Hardware CPU RAM Hard Disk
16 kg 675
Watts 2260
BTU/h 2 IBM
System
X3650 M3 2x Intel
Xeon
E5620 24GB 2x 73GB
SAS
(RAID1) +
6x 300GB
SAS
(RAID5)
Oracle Failover Database Server
The failover database server runs Oracle Data Guard. Oracle Data Guard ensures high
availability, data protection and disaster recovery and synchronizes with the main Oracle
IP2Archive - User Manual - IP2Archive Version 1.3
1. Introduction 3