EVS IPDirector Version 6.0 - November 2012 Part 10 User's Manual - Manual (Page 25)

Fields in the Scenes/Takes List
Field Description
Take Take number.
OK Quality of the take. A take can be good or bad .
TCTrack Timecode when the take has been started (according to the timecode set
in the production configuration).
StartTime Timecode when the take has been started (according to the EVS server
timecode reference).
Duration Duration of the take.
REC Status of the clip transfer from the recorder to the EVS server. It should
be
, or an error occurred.
Tfr status Status of the take transfer to the destination target(s). It should be
running, then
, or an error occurred.
3.2. Managing Scenes
Introduction
By default, the takes grid displays an empty scene, named "Scene 1". This scene can be
renamed, but it can not be deleted. If the production is not meant to be divided in several
scenes, record all the takes in that unique scene.
Possible Actions
In order to ... Proceed as follows:
Add a scene
Click the button from the toolbar. An
empty scene is appended to the production.
Rename a scene Right-click the scene row in the table, and select 'Rename'
from the dropdown list. Enter a new name for the scene, and
click OK to confirm.
Delete a scene Right-click the scene row in the table, and select 'Delete'
from the dropdown list. Click Yes to confirm the deletion.
Warning
Deleting a scene deletes all the takes included in
the scene. This is not reversible.
IPDirector - Version 6.00 - User Manual - Director's Cut
3. Working with Takes 19