EVS IPDirector Version 6.2 - June 2013 CHANNEL EXPLORER User Manual - Manual (Page 35)

This operation can be done from the Channel Explorer, from the Recorder Panel, from the
VTR Control Panel and from the Ingest Scheduler. A switch from an application
automatically applies to the other ones.
Prerequisites
• The appropriate configuration must have been done from the Remote Installer
regarding the communication parameters and the association of router OUT ports
physically linked to recorder channels.
• The Router Control service is started.
How to Assign a Router IN Port to a Recorder Channel
To assign an IN port of a video router to a recorder channel from the Channel Explorer or to
change the assignment, proceed as follows:
1. Right-click the recorder channel name from the Tree view or the Recorder view.
A contextual menu is displayed.
2. Select Assign Recorder Source.
The Assign Recorder Source window opens:
It shows the name of the router IN port already associated to the recorder channel.
3. Click the arrow next to the Router IN Port field.
The list of all the router IN ports is displayed:
IPDirector - Version 6.2 - User Manual - Channel Explorer
3. Managing Channels 27