Caution – Concord ABSORBER XT INSTRUCTION MANUAL User Manual
Page 9
32
33
CaUTiOn!
• The car seat must be secured with the ISOFIX system,
even if no child is traveling in it!
• Both ISOFIX adapters must be
locked securely in place and the
safety displays on both adapters
must show green.
• The support leg must rest
securely on the floor and must be
locked in place.
Next, rotate the ISOFIX control button (
15
) clockwise
until the CONCORD ABSORBER rests as tightly as
possible on the rear of the car seat.
In vehicles with serial
headrests, a readjustment of
the headrest or its removal
will allow for a better mounting
position of the car seat.
Push the release button (
10
) outward and position
the support leg (
11
) so that it rests securely on the
floor and the safety display shows GREEN.
Release the control button (
10
) to lock the support
leg in place.
Please remember to readjust or replace the headrest in the correct position
if an adult will be sitting in that seat instead.
Set down the CONCORD ABSORBER in drive direction
onto the seat or the seat bench.
Push the child seat backwards onto the ISOFIX
receptacles until the locking mechanisms of both
ISOFIX adapters (
16
) audibly lock and the safety
displays on both adapters are GREEN!
Fold the support leg (
11
) at the bottom of
the CONCORD ABSORBER forwards until it
engages.
Rotate the ISOFIX control
button (
15
) at the front
edge anticlockwise until the
ISOFIX adapters (
16
) on
the back of the seat are fully
extended.
_ MOUnTinG THE COnCORD aBSORBER WiTH iSOFiX
This child safety restraint is compliant with the iSOFiX weight
category: up to 18 kg and iSOFiX size category: a