Concord ABSORBER XT INSTRUCTION MANUAL User Manual
Page 10
34
35
_ VEHiClES SUiTaBlE FOR iSOFiX
The CONCORD ABSORBER with ISOFIX system has been approved for
‚semi universal‘ use, and is suitable for mounting on specific vehicle seats.
The appendix CAR FITTING LIST contains an overview of vehicles and
vehicle seats that have been approved for the use of the CONCORD
ABSORBER with lap and diagonal seat belt or ISOFIX system in connection
with a support leg.
Should your vehicle not be listed, please ensure that the CONCORD
ABSORBER can be properly mounted in your car/ on the desired seat before
you purchase the child seat!
Read the user manual provided by the manufacturer of your vehicle and the
mounting and security notices contained in this user manual.
For latest updates, please visit www.CONCORD.de.
_ REMOVinG THE COnCORD aBSORBER WiTH iSOFiX
Turn the ISOFIX control dial (
15
) anticlockwise until the
ISOFIX adapters are fully extended.
Push the release button (
10
) outward and move the
support leg (
11
) into its top-most position.
Push the buttons to unlock the ISOFIX adapters (
16
)
forward until the safety displays are red and the seat is
released.
To retract the ISOFIX adapters (
16
), place the
CONCORD ABSORBER on an even and clean surface.
Rotate the ISOFIX control button (
15
) clockwise until
the ISOFIX adapters (
16
) are fully retracted.
Loosen the support leg‘s
lock (
11
) and collapse the
leg.