Xoro HSD 6000 - Manual (Page 157)

AMPLIFIER / DIGITAL TUNER SYSTEM
Tuning operation
After power-on, the machine will be at the DVD mode with
the AMP default setting. If you want to enjoy the Tuner you
can, when a DVD disc loaded on the disc tray, press the
STOP on the remote control twice to stop the DVD Player
(the first press is for a pre-stop.), and then you press the
key INPUT to turn on the Tuner. The on setting of the Tuner
is the last one when the unit turned off. Press the AM/FM to
listen to AM or FM broadcasting.
Press INPUT on the remote control to convert the DVD
mode into Tuner Mode and the OSD appears:
Press AM/FM on the remote control to convert the Tuner
broadcasting between AM/FM.
Press to convert between auto and manual station-
selection saving. The OSD appears:
Under AUTO MODE, for both AM and FM, press FWD or
REV to search up to higher frequencies or downward to
lower frequencies, up to 20 frequencies broadcasting (10
frequencies of AM and FM each) can be tuned in and kept
in correspondence with the digitals 1 to 10.
When the STOP pressed, the searching stops. Once one
frequency is spotted, OSD appears e.g.:
It also appears on the VFD:
FM/AM selecting and saving
I/P
- - TUNER MENU - -
FM MODE
STATION
FREQ
MODE
1
101.7 MHz
AUTO
- - TUNER MENU - -
AM MODE
STATION
FREQ
MODE
1
540 KHz
AUTO
- - TUNER MENU - -
FM MODE
STATION
FREQ
MODE
5
107.7 MHz
MANUAL (or AUTO)
- - TUNER MENU - -
FM MODE
STATION
FREQ
MODE
1
107.7 MHz
MANUAL (or AUTO)
SAVE TO 1
u FM 1 101.7 MHz
157