Xoro HSD 6000 - Manual (Page 132)

INITIAL SETTING
Amplifier Adjustment (SPEAKER SETUP)
SPEAKER SETUP
Audio Out & Test Tone
SPDIF/RAW
SPDIF/PCM
DOWN MIX
FRONT SPEAKERS
This Unit is set to amplifier mode by default. If you do not
want to use the integrated amplifier section and the
supplied sound system for any reason, you must change
the audio setup.
You can choose to send the player's audio signals to an
external receiver using the following outputs:
Set to this selection will output the raw
bit stream signal of Dolby Digital or DTS from the
coaxial jack. In order to enjoy Dolby Digital DTS
discs, this unit's digital output jack must be connected to the digital-input jack of a Dolby Digital or
DTS compatible receiver or processor.
PCM stands for Pulse Code Modulation and is digital audio. Connecting this unit to
an amplifier with a built-in D/A converter can play the same digital audio format as on CDs.
Additionally, 2-channel analogue audio will output from the audio output jacks of amplifier.
LT/RT Please connect to a built-in Dolby Pro Logic
receiver or amplifier to enjoy the Dolby Pro-Logic
surround sound.
STEREO Down mixed Stereo L/R audio output.
OFF Turn off the DOWN MIX function to enable the
5.1ch setting items.
The front speakers should be set to small when the unit is
used with the supplied sound system.
®
®
®
l
l
l
l
l
-
-
-
-
-
- - AUDIO SETUP PAGE - -
SPDIF OUTPUT
DOWN MIX
FRONT
LOUD SPEAKERS SETUP
OFF
SPDIF/RAW
SPDIF/PCM
CENTER
REAR
SUBWOOFER
C NTER DELAY
E
REAR DELAY
TEST TONE
- - AUDIO SETUP PAGE - -
SPDIF OUTPUT
DOWN MIX
FRONT
LOUD SPEAKERS SETUP
LT/RT
STEREO
CENTER
REAR
SUBWOOFER
C NTER DELAY
E
REAR DELAY
TEST TONE
OFF
- - AUDIO SETUP PAGE - -
SPDIF OUTPUT
DOWN MIX
FRONT
LOUD SPEAKERS SETUP
LARGE
CENTER
REAR
SUBWOOFER
C NTER DELAY
E
REAR DELAY
TEST TONE
SMALL
132