AASTRA 4425 IP Vision for BusinessPhone User Guide - Manual (Page 133)

133 BusinessPhone – Dialog 4425 IP Vision
Installation
Installation
Configuration
When the Dialog 4425 IP Vision has been connected to a power
supply and to the IP network (LAN), the display will show:
The (x) represents a timer counting down in seconds. This display
is for administrator mode only. Do not press a key during this time,
and No change is selected automatically.
Note: If you press a key accidentally, please contact your
system administrator.
Now the display shows:
The IP telephone is connecting to the DHCP server and gets its IP
address from the network.
Note: This menu is not displayed if you are using fixed IP
addresses.
After the IP address has been retrieved, the telephone checks
automatically if new software is available. See section “ Software
updates ” on page 134.
Settings CallList Contacts
User administrator mode to change IP settings
(x)
(No change)
Settings CallList Contacts
Connecting to DHCP server