AASTRA AMC 3 for Android EN - Manual (Page 25)

8 Features of the AMC
8.6 In-Call Features
If a data channel (Wi-Fi or Packet Data) is available during a call, your AMC will enable
the in-call features of your PBX. For example: The in call menu will not be available
during a 2G call as no data access is possible during call (if no Wi-Fi is available for
signaling). When there’s no data channel, the AMC will give you the option to open the
native dialpad which enables you to type in digits (e.g. PINs) to enter conferences and
the like.
From the latest version on, the Hold option can be found
in the call details screen along with the speaker and mic
option (to the left). Pressing the pause button in the Call
Details screen also puts the current call on hold.
The bluetooth button lets you connect a bluetooth head-
set for the current call. From the view in the screenshot
to the left you can swipe to the left to open the Dialer, or
the right to open the Features screen (see next screen-
shot below). You can also touch the screen names un-
derneath the notifications bar.
8.6.3 Blind Transfer
Transfer a call to a second party. Select this feature and choose a contact or select a
number. Your call will be terminated and disappear from the home screen as soon as
the other party has picked up.
8.6.4 Toggle, Complete Transfer, and Conference
If there are two active calls (one of them on Hold ), you can Toggle back and forth
between them, enter a three-party conference (Complete conference), or join the two
calls (Complete transfer ) and terminate the calls on your end.
amc-3_android_ug_en_2012-10 25