Personalizing your phone – AASTRA 620d for Aastra 400 User Guide EN User Manual

Page 74

Personalizing your phone

eud-1291/1.0 – R1.0 – 01.2011

You can activate or deactivate the Bluetooth manually.

Notes:
• Only one Bluetooth connection at a time is possible.
• To find out how to make phone calls with the headset, refer to the Chapter

"Using

a headset"

, page

Press the navigation key to the right or the

Menu

softkey.

Settings

Scroll to

Settings

and press the

Select

softkey.

Bluetooth

Scroll to

Bluetooth

and press the

Select

softkey.

Enable Bluetooth

Activating/deactivating Bluetooth mode:

Scroll to

Enable Bluetooth

and press the

Select

softkey.

➔

The setting is stored,

is displayed.

Or:

The Bluetooth-mode is also available via the service menu: Press key 5 and
hold it down for a moment, >

activate Bluetooth

Note:
An activated Bluetooth mode does not imply that a Bluetooth connection is
running.

Subscribe headset

Pair new device:

Scroll to

Subscribe headset

and press the

Select

softkey.

Switch on the device you want and set to subscribe mode. Select the device
you want and enter the Bluetooth device PIN.

➔

Device is paired,

is displayed.

Select headset

List of paired devices:

Switch on the device you want, scroll to

Select headset

, press the

Select

softkey

and select a device from the list.

➔

The list of coupled devices is displayed.

Note:
The list is limited to 2 Bluetooth devices. Remove a device before you connect
another one.

Delete

Remove device:

Scroll to

Select headset

and press the

Select

softkey.

Select the device you want and press the

Delete

softkey.

➔

Device was removed.