Blue Ox SC3001 - Manual (Page 8)

Figure 5
Figure 7
6. Install battery (12-volt lawn and garden
tractor style battery, not included). Remove
the strap and then the lid from the battery
holster to place a 12-volt battery inside.
7. Slide the ramp extensions onto the main
ramp. The mid ramp extension slides on
first (Figure 6). The illustration on page 3
shows these as 61-6152 (mid extension)
and 61-6153 (end extension).
8. Insert the ½-inch pins (229-0520). One
pin fastens the mid ramp and end ramp
extensions to each other. The other pin
fastens this assembled ramp extension to
the main ramp. Figure 7 shows the ramp
extensions fastened with the ½-inch pin.
9. Attach corded control to the electrical
connection near the battery and motor.
Make sure the cord is away from ALL
moving parts. If it is NOT clear of the
rack, damage could occur.
Be sure to install the 2 tethered pins
and clips in the ramps. FAILING to do
so could result in personal injury and/or
property damage. (Figure 7 )
KEEP YOUR HANDS AWAY
FROM MOVING PARTS.
Make sure area around the
SportLoader TM is clear of all
bystanders. The operator is the only
person who needs to hold the ramp so
it does NOT slam into the ground or
truck bed when operated.
! CAUTION
Figure 6
Page 5 of 7 09/06