Blue Ox BX88180 User Manual
Blue Ox For the car
®
®
Wireless Remote Indicator
BX88180
Installation Instructions
Installation for Wireless Remote Indicator BX88180
Th
e BX88180 Wireless Remote Indicator is designed for use with supplemental braking systems.
Th
e supplemental braking system must be assembled and installed per its instructions before the
Wireless Remote Indicator installation can begin.
Contents:
Ref #
Qty.
Part #
Description
1 1
62-3503
Transmitter
2 1
62-3504
Receiver
3
1
294-0853
Terminal Bullet (Female)
4
1
294-0854
Terminal Bullet (Male)
5 1
293-1419
ScotchLock
Connector
6
2
192-0029
Velcro, 3/4 X 2, Loop Side
6
2
192-0030
Velcro, 3/4 X 2, Hook Side
WARNING:
USE ONLY GENUINE FACTORY REPLACEMENT PARTS.
Do NOT substitute homemade or non-typical parts. This may cause
your wireless remote indicator to fail and result in injury or death. If
repairs of parts or components of your wireless remote indicator are
needed, you may order them through your nearest Blue Ox
®
dealer or
distributor, or call our Customer Care Team at (402) 385-3051 or toll
free at (888) 425-5382.
Installation Instructions
1. Remove the receiver from the package.
2. Plug the receiver’s power cord into the towing
vehicle’s 12-volt accessory receptacle.
3. Mount the receiver so that its LED faces the
towed vehicle and is also visible from the RVs
driver’s seat.
4. Remove the transmitter from the package.
5. Use an electrical tester to determine the
cold side of the brake light wire. Attach the
transmitter wire to the cold brake light wire
in the towed vehicle using the ScotchLock
connector included.
6. Find the cold side of the brake signal wire
- under the dash, and above the brake pedal. It
is usually located behind what looks like a push
button switch that releases when the brake
pedal is pressed – activating the brake lights.
Slip the slotted end of the ScotchLok connector
around the cold side of the brake signal wire
under the dash. Insert the transmitter wire into
the partially plugged side of the ScotchLock
connector.
Tools Required
Electrical Tester
Page 1 of 2
292-2567
12/5/08
3
1
4
2
5
6