Blue Ox SC9007 - Manual

© 2005 Blue Ox Division, Automatic Equipment Mfg. Co. • One Mill Road, Industrial Park
Pender, Nebraska 68047 • Phone 402-385-3051 • Fax 402-385-3360 • www.blueox.com
SC9007
Motorcycle Rear Tire Guide
Thank you for purchasing the SC9007 Motorcycle Rear Tire Guide from Blue Ox! It's constructed
of durable steel and has a shiny black powder coat finish that will give you many years of service. SC9007
will keep your rear tire from sliding around when towing.
If you should have any questions, please contact Blue Ox's Sales/Service Department.
292-2741 4/05 Page 1 of 1
Installation Instructions
1. Load motorcycle onto platform of carrier or lift, putting the front tire in the wheel
chock.
2. Strap the motorcycle to the platform using tie down straps.
3. Set one tire guide on each side of the rear tire, leaving about a 1/2" to an inch of
space between the tire and the tire guide. Then mark and drill a 11/32" hole
through the platform.
4. Using one 5/16-18 x 1" carriage bolt, flatwasher, and nylock nut, bolt one side of
the tire guide (don't tighten completely). Set the other end of the tire guide,
then mark and drill a 11/32" hole through the platform.
5. Bolt the other end, and tighten completely along with the other bolt.
6. Do the same with the other tire guide.
7. The SC9007 has two tie down convenience links, one on each tire guide
that will help with securing the motorcycle.