American Magnetics 4Q06125PS-430 High Stability Integrated Power Supply System - Manual (Page 65)

Rev. 5 47
Operation
Setup Menu : Supply
3.10.1.1.1.1 Min Output Voltage
The minimum output voltage is specified in volts (V) and reflects
the minimum output voltage compliance of a connected power
supply. The valid range is 0.000 to -20.000 V, and can be set by
using either the numeric keypad per section 3.3 on page 25 or the
fine adjust knob (section 3.4 on page 26). A unipolar power supply
has a minimum output voltage of 0.000 V.
3.10.1.1.1.2 Max Output Voltage
The maximum output voltage is specified in volts (V) and reflects
the maximum output voltage compliance of a connected power
supply. The valid range is +0.001 to +20.000 V, and can be set by
using either the numeric keypad per section 3.3 on page 25 or the
fine adjust knob (section 3.4 on page 26).
3.10.1.1.1.3 Min Output Current
The minimum output current is specified in amperes (A) and
reflects the minimum output current capacity of a connected power
supply. The valid range is 0.000 to -2000.000 A 1 , and can be set by
using either the numeric keypad per section 3.3 on page 25 or the
fine adjust knob (section 3.4 on page 26). A unipolar power supply
has a minimum output current of 0.000 A.
1. The minimum and maximum output currents are bounded by the Model 430 Pro-
grammer configuration (refer to specifications on page 8 and in the Appendix). The
entered value cannot exceed the programmable limits.
+0.00 A — Min Output Voltage (V)
+0.00 Vs -6.000
+0.00 A — Max Output Voltage (V)
+0.00 Vs +6.000
+0.00 A — Min Output Current (A)
+0.00 Vs +0.000