American Magnetics 4Q12125PS-430 High Stability Integrated Power Supply System - Manual (Page 87)

Rev. 5 69
Operation
Setup Submenu : Net Settings
3.10.4.1 Addr Assignment (Present)
This submenu item displays the currently selected method of IP
address assignment. The value will either be DHCP or Static. The
default value is DHCP, which means that the system IP address,
the subnet mask and the gateway IP address are dynamically
determined by the network DHCP server.
3.10.4.2 System Name (Present)
This submenu item displays the currently assigned system name
(also known as host name or computer name), the name by which
the Model 430 Programmer is identified on a network. This setting
can only be modified using remote communications (either
Ethernet or RS-232); it cannot be edited using the front panel
keypad.
3.10.4.3 IP Address (Present)
This submenu item displays the currently assigned system IP
address for the Model 430 Programmer. The value in parentheses
after the IP address value indicates how the IP address is assigned.
DHCP indicates that the value is dynamically assigned by a DHCP
server; Static indicates that the value is static, assigned by the
Model 430 user. The default value is 0.0.0.0. However, since the
default method of IP address assignment is by DHCP server, this
value is typically set by the network DHCP server.
3.10.4.4 Subnet Mask (Present)
This submenu item displays the currently assigned subnet mask
for the Model 430 Programmer. The value in parentheses after the
subnet mask value indicates how the subnet mask is assigned.
+50.00 A — Addr Assignment (Present)
+0.50 Vs DHCP
+50.00 A — System Name (Present)
+0.50 Vs AMI
+50.00 A — IP Address (Present)
+0.50 Vs 0.0.0.0 (DHCP)
+50.00 A — Subnet Mask (Present)
+0.50 Vs 0.0.0.0 (DHCP)