beautypg.com

Appendix – American Magnetics 4Q12125PS-430 Integrated Power Supply System User Manual

Page 189

background image

Rev. 5

171

Appendix

Remote Computer Communication (Ethernet)

Note

The Addr Assignment (Present) must show “DHCP” as originally set

by AMI.

Note

In the following step, the IP Address is the four part number

separated by periods (.), and will change with each Ethernet

connection.

6.

Use < >/< > to locate IP Address (Present), similar to that shown

in Figure 1.

7.

Make note of the IP Address (Present).

8.

Start a terminal

emulation program on

the remote computer.

As an example, this

procedure will use the

HyperTerminal

program running

under Windows XP.

9.

Choose File > New

Connection

and in the resulting

screen field, enter a name for the

connection. Click OK - the
Connect to

screen will appear.

+0.00 A — IP Address (Present)
+0.00 Vs

169.254.243.199 (DHCP)

See also other documents in the category American Magnetics Equipment: