Bosch GML SoundBoxx Professional 14,4 V - Manual (Page 14)

14 | English
1 619 929 L56 | (6.12.12) Bosch Power Tools
When the corrective measures do not eliminate an error,
please contact an authorised service agent for Bosch power
tools.
Maintenance and Service
Maintenance and Cleaning
For safe and proper working, always keep the construction
site radio clean.
Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.
If the construction site radio should fail despite the care taken
in manufacture and testing, repair should be carried out by an
authorised customer services agent for Bosch power tools.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the construction site radio.
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch’s application service team will gladly answer questions
concerning our products and their accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: (0844) 7360109
Fax: (0844) 7360146
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: [email protected]
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: [email protected]
Construction site radio inoperative on A/C power supply
Power-supply plug or
connection cable defective
Check the power-supply plug
and the connection cable,
and have them replaced as
required
Wrong power-supply plug
inserted Use the original Bosch power-
supply plug (also available as
spare part)
Construction site radio inoperative on DC power supply
Battery contacts
contaminated
Clean the battery contacts
(e.g. by inserting and
removing the battery several
times) or replace the battery
Battery pack defective Replace the battery
Battery pack too warm or too
cold Wait until of the battery has
reached operating tempera-
ture
Construction site radio suddenly inoperative
Power-supply plug or battery
pack not properly or
completely inserted
Plug in power-supply plug or
battery properly and
completely
Bad radio reception
Interference from other
devices or insufficient set-up
location
Position the construction site
radio at another location with
better reception or with
greater clearance to other
electronic devices or socket
outlets.
Time indication faulty
Back-up batteries of clock
empty
Replace back-up batteries
Back-up batteries incorrectly
inserted (wrong polarity) Insert back-up batteries
correctly
Cause Corrective Measure
OBJ_BUCH-1777-001.book Page 14 Thursday, December 6, 2012 1:42 PM