Bosch GTS 10 J Professional - Manual (Page 30)

30 | English
1 619 929 J53 | (12.5.11) Bosch Power Tools
21 Allen key (5 mm)
22 Ring spanner (23 mm)
23 Push stick
24 Insert plate
25 Riving knife
26 Saw blade
27 Lens
28 Profile rail
29 Cable holder
30 Retaining bracket for storage of the auxiliary parallel
guide
31 Sawdust ejector
32 Extraction adapter
33 Fixture for storage of the blade guard
34 Insert-plate notches
35 Clamping handle of the parallel guide
36 V-guide of parallel guide
37 Auxiliary parallel guide
38 “Auxiliary parallel guide” fastening kit
39 Guide rail of the angle stop
40 “Profile rail ”fastening kit
41 Fastening screw for sawdust ejector
42 Clamping nut
43 Spindle lock lever
44 Clamping flange
45 Tool spindle
46 Mounting flange
47 Indicator for bevel angle
48 Scale for bevel angle
49 Locking knob for various mitre angles
50 Angle indicator on the angle guide
51 Saw-table clearance indicator
52 ON button
53 Knurled nut for profile rail
54 Phillips screw for adjustment of stop 55
55 Stop for 0° mitre angle
56 Screw for bevel angle indicator
57 Phillips screw for adjustment of stop 58
58 Stop for 45° mitre angle
59 Front Allen screws (5 mm) for parallelism adjustment of
the saw blade
60 Rear Allen screws (5 mm) for parallelism adjustment of
the saw blade
61 Screw for saw-table clearance indicator
62 Screw for parallel guide clearance indicator
63 Adjusting screws for insert plate
64 Allen key (2 mm)
65 Holder for storage of “auxilliary parallel guide fastening
kit”
66 Retaining clamp for storage of the extraction adapter
67 Fastening nut for the ring spanner and for attaching the
push stick
68 Holder for storage of the Allen key
69 Retaining clamp for storage of the angle stop
70 Adjustment screw for tightening tension of guide 36
* depending on country version
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Technical Data
Noise Information
Measured sound values determined according to EN 61029.
Typically the A-weighted noise levels of the product are:
Sound pressure level 103 dB(A); Sound power level
116 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardization documents: EN 61029
according to the provisions of the directives 2004/108/EC,
2006/42/EC.
EC Type Certification No. MSR 1034 by notified testing agen-
cy No. 0366.
Technical file at:
Robert Bosch GmbH, Dept. PT/ESC,
D-70745 Leinfelden-Echterdingen
Table saw GTS 10 J
Professional
Article number
3 601 M30 ... ... 500
... 530
... 570
... 590
... 5P0
... 5R0 ... 560
Rated power input W 1800 1650
No-load speed min -1 3650 3650
Reduced starting current z z
Weight according to
EPTA-Procedure 01/2003 kg 26 26
Protection class /II /II
Dimensions (incl. removable product features)
Width x depth x height
mm 578 x 706 x 330
Maximum workpiece dimensions, see page 34.
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine.
The trade names of the individual machines may vary.
Dimension of suitable saw blades
Saw blade diameter mm 254
Blade body thickness mm 1.7–1.9
Tooth thickness/setting, min. mm 2.6
Mounting hole diameter mm 30
OBJ_BUCH-1325-002.book Page 30 Thursday, May 12, 2011 1:51 PM