Garmin GPSMAP 60C - Manual (Page 28)

18
GPSmap 60C
GPS Navigation
To create a waypoint with the map panning arrow:
1. With the Map Page displayed, move the panning arrow (Map
Pointer) to the map item you want use as a waypoint. If there
is information in the mapping database for that location it
momentarily highlights and displays a name or address.
2. Press ENTER to display the waypoint information page. With
the Information Page displayed, highlight the “Save” button at
the bottom of the page and then press ENTER to save it to the
Find Menu Waypoints List.
If the map item selected does not contain any information, a
message appears, stating “No map information at this point.
Do you want to create a user waypoint here?” Select “Yes” and
press ENTER to display a new waypoint page.
Another method for creating a waypoint is the Man Overboard (MOB)
feature. Typically, this is an application for marking a location on water
where you cannot stop quickly and must return to a point where there
are no land marks for reference.
To create a waypoint using the MOB feature:
1. Press and hold the FIND key to display the MOB prompt.
2. Select “Yes” and press ENTER to display
the Map Page showing the path from your
current location to the MOB point. Use the
Compass Page for additional guidance to
the MOB point.
Information Page for a
Map Point with Data
Using Waypoints
Waypoint Page for a
Map Point without Data
Map Item selected as a
Waypoint
MOB Prompt