Garmin GPSMAP 60C - Manual (Page 21)

11
GPSmap 60C
GPS Navigation
The Map Page
Two Data
Fields
Data Field
Sub-Menu
Four Data
Fields
List of
Data Field
Options
Three Data
Fields
To display Data Fields:
1. With the Map Page Options Menu displayed, use the
ROCKER key to highlight the Data Fields option and press
ENTER.
2. Observe the sub-menu options: “Map Only,” “2 Data Fields,”
“3 Data Fields” and “4 Data Fields.”
You can choose to leave the Map Page as is (full page map),
or add two, three or four navigation data fields.
3. Highlight your choice and press ENTER.
To change Data Fields:
1. After you display the data fields, a “Change Data Fields”
option appears on the options menu when you press the
MENU key.
2. Select this option and press the ENTER key to place a highlight
in the upper left data field.
3. Press ENTER again to select from a list of types of navigation
data to display in that field.
4. After making your selection and entry, use the ROCKER key to
move to the next field and repeat the process.
Some Data Field Options are related to the display of data received
from other devices interfaced to the GPSmap 60C. For an explanation
of what each option represents, see page 70 of the Appendix.