Garmin GPS 165 TSO - Manual (Page 90)

The SID select page also allows you to review all the available SIDs for the departure
airport and select, delete or change the active SID.
To replace the active SID with another SID:
1. Press
R
and rotate
O
until the SID Select page appears.
2. Press
C
and rotate
O
to select the desired new SID. Press
E
.
To delete the active SID:
1. Press
R
and rotate
O
until the SID Select page appears.
2. Press C . The active SID (denoted by an asterisk) will flash.
3. Press
\
, followed by
E
. The SID waypoints will be removed from the active route.
SIDs can also be selected and deleted from storage routes through the Route Catalog page.
To select a SID from the Route Catalog page:
1. Display the desired route on the Route Catalog page.
2. Select ‘sid?’ in the route action field and press
E
.
3. Select the desired SID and transitions.
4. The SID waypoints will be inserted into the route and the Route Review page will be displayed.
To replace a SID from the Route Catalog page:
1. Display the desired route on the Route Catalog page.
2. Select ‘sid?’ in the route action field and press
E
.
3. Select the desired new SID and transitions.
4. The SID waypoints will be inserted into the route and the Route Review page
will be displayed. 80
APPROACH NAVIGATION
Selecting & Deleting SIDs
SIDs may be saved with any stored route.
The SID select page allows you to select a new
SID on the fly.
155man (GOOD) 7/24/98 1:57 PM Page 80