Garmin StreetPilot 2730 - Manual (Page 58)

50 StreetPilot 2730 Owner’s Manual
A
PPENDIX
Updating the Software and Map Data
If you register your 2730, you will receive notification of
software and map updates. To register your 2730, go to
www.garmin.com/registration/selectreg.jsp .
To update the 2730 software:
1. Load the USB drivers using the enclosed
CD-ROM. See page 21 for more information.
2. Connect the USB cable to your 2730 and your
computer.
3. Connect the AC cable to the power connector
on the back of the StreetPilot. Turn on the
StreetPilot.
4. Touch Garmin Mode .
5. Go to at www.garmin.com/products/sp2730 .
Select Updates and Downloads .
6. Click Download next to the unit software.
7. Read and agree to the terms. Click Download .
8. Select Run (or Open ). Your software is updated.
Check www.garmin.com/unlock/update.jsp to see if an
update for your map software is available.
Using a Remote GPS Antenna
Use an optional external remote GPS antenna (Garmin
GA 25) when using the unit in a vehicle with a coated
windshield or an in-screen heating system, which can
block GPS signals. Connect the antenna to the MCX
connector located on the back of the unit. To purchase,
go to the Garmin Web site: www.garmin.com/products
/sp2730 . Click Accessories .