Technical specifications, Changing the fuse, Technical specifications changing the fuse – Garmin StreetPilot 2730 User Manual
Page 57: Technical specifications
StreetPilot 2730 Owner’s Manual
49
A
PPENDIX
Technical Specifications
Size: 5.6” W x 3.2” H x 2.0” D (14.3 x 8.0 x 5.0 cm)
Weight: 0.93 lbs (420 g)
Unit Case: Rugged; fully gasketed; IPX-7 waterproof*
Display: Sunlight-readable, 17:9 WQVGA automotive
color TFT display with touch screen and auto dimming;
454 pixels by 240 pixels.
Map Storage: Pre-programmed internal memory
Temperature: 5° to 158°F (-15° to 70°C)
Power Supply
Source: 12 VDC
Usage: 12 watts maximum @ 13.8 VDC
Fuse: 3AG - 1.0 Amp
Remote Control: Two AAA alkaline batteries (not
included)
For a complete list of specifications, visit the Garmin
W
Contact your local waste disposal department for
information on properly disposing of the unit.
* The Remote Control is not waterproof.
Changing the Fuse
A 3AG 1.0 Amp fast blow fuse is located at the tip of the
vehicle adapter. If you need to change the fuse, simply
unscrew the black, round end piece and replace the fuse.
Unscrew