Garmin Oregon 400t - Manual (Page 45)

Oregon Series Owner’s Manual 37
Appendix
To turn Demo Mode on, touch Setup
> System > GPS > Demo Mode .
Connecting Your Oregon
to a Computer
You can connect the Oregon to your
computer using the supplied USB
cable.
To connect your Oregon to your
computer:
1. Lift the weather cap on the bottom
of the Oregon.
2. Insert the smaller connector
on the USB cable into the USB
mini-B jack.
3. Connect the other end of the
cable to a USB port on your
computer.
Installing a microSD ™
Card
The Oregon microSD data card tray
is located beneath the AA batteries.
You can purchase microSD memory
cards from an electronics supplier,
or purchase preloaded detailed map
data cards from your Garmin dealer.
In addition to map and data storage,
the memory cards can be used to
store files such as images, cartridges,
geocaches, routes, waypoints, and
custom POIs.
Go to
http://buy.garmin.com for
compatible map products.
To install or remove a microSD
card:
1. Lift the latch on the back of the
Oregon ( page 2 ) and remove the
battery cover and the batteries.
2. Lift the metal cover.