Garmin Oregon 400t - Manual (Page 10)

2 Oregon Series Owner’s Manual
Getting Started
Battery Information
Oregon units operate on two AA
batteries. Use alkaline, NiMH, or
lithium batteries. Use precharged
NiMH or lithium batteries for best
results. Standard alkaline batteries
are not recommended for Oregon
550 units when using the camera
feature.
To install the batteries:
1. Lift the latch and remove the
battery cover.
Latch Battery cover
2. Insert the batteries, observing
polarity.
3. Replace the battery cover and
push the latch down.
To select the battery type:
1. Touch Setup > System > Battery
Type .
2. Touch Alkaline , Lithium ,
Rechargeable NiMH , or
Pre-Charged NiMH .
Long-Term Storage
Remove batteries when you do not
plan to use the Oregon for several
months. Stored data is not lost when
batteries are removed.
Turning On and Off the
Oregon
1. To turn on the Oregon, press .
2. To turn off the Oregon, press and
hold .