AIPTEK PocketCinema V100 User Manual

Page 5

User’s Manual

Page 5

Remote Controller

1. Home
2. OK
3. Fast rewind
4. Return
5. Navigation Keys
6. Play / Pause
7. Fast forward

Warning:
Improper use of the battery may cause overheating, explosion
or ignition, which can result in an injury or a fire. Battery leakage
may damage the remote controller.
Do not expose the remote controller unit to direct sunlight.
Do not recharge, dissemble, deform or heat the battery.
Do not expose the battery to fire or water.
Immediately replace the exhausted battery.
Take out battery when the remote is not in use for a long time.

Getting Started

Charging the product

The projector is builted in a 1800 mAh Li-Ion battery
for mobile use. Please charge the projector for 4
hours prior to its first use. Connect one end of the
supplied AC adapter to DC IN jack and the other end
to a power outlet to starts charging. Exchange the
plug (EU, US and etc.) of AC adapter that
accommodates the type of power outlet in your
country if it’s different.

LED Indicator

During charging, the LED on the top housing turns Red. It turns to Green when is the
battery is fully charged.

Projecting from Internal Memory

The projector has 2GB internal memory for file storage. Please download media files
from your PC to the internal memory for projection:

1. Turn on the PC and the projector.
2. Connect the mini-USB port of the

projector to the PC via USB cable.
The message “Connected” will
appear on the screen to show the
progress. Once the connection is
established, the screen and
ventilation fan will automatically turns
off to save the power. Now the
projector is in mass storage mode.

nfradred Receiver