ACU-RITE 100S - Manual (Page 39)

100S Reference Manual
REFERENCE
36
±
Changes the sign of the entered value from posi-
tive(+) to negative(-) or vise versa. Numbers are
positive unless a (-) appears in front of them.
BOLT DEF
BOLT USE
CLEAR
Used to create a bolthole pattern.
Used to run a bolthole pattern.
Acts as backspace key during numeric entry;
otherwise, it clears or cancels the last operation.
ENTER
Completes numeric operations; selects next
parameter in
SETUP or BOLT DEF operations.
.
Decimal point can be used during numeric entry.
This is also used to initiate a reference mark
evaluation.
0-9 Used to enter a distance, angle, or other number
value.