Acura 2009 RDX - Manual (Page 55)

Tighten the strap according to the
seat maker’s instructions.
Attach the tether strap hook to the
anchor, making sure the tether
strap is not twisted. Remove the cargo area cover, and
place it on the cargo area floor
(see page
).
After properly securing the child
seat (see page
), lift the head
restraint, then route the tether
strap over the seat-back and
through the head restraint legs.
Remove the head restraint (see
page
). Make sure the removed
head restraint is secured in the
cargo area. Reinstall the head
restraint when the child seat is
removed.
After properly securing the child
seat (see page
), route the
tether strap over the top of the
seat-back.
When you install the child seat in
the rear center seating position,
you cannot use the seat belt
behind the driver’s seat.
1.
4.
2.
3.
(Outer seating position)
(Rear center seating position)
49
49
133
157
Installing a Child Seat
Dr
iv
er
and
P
asseng
er
Saf
e
ty
51
TETHER STRAP HOOK TETHER STRAP ANCHOR
2009 RDX
Table Of Contents Main Menu