Acura 2009 RDX - Manual (Page 357)

Each outside mirror has side turn
signal lights. The lights should be
replaced by your dealer.
The license plate has two lights
above it. The bulbs should be
replaced by your dealer.
Press the brake pedal to make
sure the new bulb is working.
Put the socket back into the light
assembly, and turn it clockwise to
lock it in place.
Reinstall the high-mount brake
light assembly into the tailgate.
Tighten the two screws and
reinstall the covers.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
6.
5.
7.
3.
4.
Lights
Side Turn Signal Lights
Replacing a Rear License Plate
Light Bulb
Ma
int
e
na
nce
353
SOCKET
BULB
2009 RDX
Table Of Contents Main Menu