Acura 2009 RDX - Manual (Page 353)

Remove the socket by turning it
one-quarter turn counterclockwise.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Open the tailgate. Place a cloth on
the edge of the light assembly
cover. Remove the cover by
carefully prying in the notch on its
middle edge with a flat-tip
screwdriver.
Determine which of the two bulbs
is burned out: taillight or back-up
light.
Install the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Turn on the lights to make sure
the new bulb is working.
1.
2.
3.
4.
3.
4.
CONTINUED
Lights
Replacing Rear Bulbs
(in Tailgate)
Ma
int
e
na
nce
349
COVER
NOTCH SOCKETS
BULBS
2009 RDX
Table Of Contents Main Menu