Acura 2010 TL - Manual (Page 530)

Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
Remove the bulb by turning it
about one-quarter turn
counterclockwise.
Use a wrench to remove the
mounting bolts, and remove the
holding clip with a flat-tip
screwdriver.
Pull down the under cover from
the bumper carefully.
Use a flat-tip screwdriver to
remove the three holding clips
from the inner fender. 4.
5.
3. 2.
CONTINUED
Lights
Ma
int
e
na
nce
527
HOLDING
CLIP
CONNECTOR
BOLTS HOLDING CLIP COVER BULB
SPOILER
09/07/29 18:31:38 31TK4610_532
2010 TL